Please wait while the page loads...

2013 Nissan Murano Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also feasible as the OBD (on-board computer diagnostic system) in your Murano. There are hundreds of divergent codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling decisive diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, noticeable and favorable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Transmission issues
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • Bad Spark Plugs
  • O2 Sensor
  • Old Battery
  • Ignition system faults

This is why it is terrific for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a exceptional concern, you risk damaging your car extra by not repairing the issue good away. Call Crown Nissan of Greensboro at 3368142241 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out hastily by a certified Nissan mechanic.

Check Engine Light Service 2013 Nissan Murano

What do you do when you’re driving along in your Nissan Murano and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Nissan owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Nissan Murano checked as soon as conceivable. Ignoring that warning could end up causing finest damage to pricey engine parts.

When your 2013 Nissan Murano's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t detailed, a computer turns on your check engine light. This amber or yellow light is customarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is pick with an electronic analyze tool that is used by our Nissan auto repair mechanics at Crown Nissan of Greensboro. There are also a number of relatively cheap code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an compelling expert to mean the issue and repair it.

2013 Nissan Murano Check Engine Light Flashing

Although there are countless achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful current causes including something as uncomplicated as a loose gas cap. Other current reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Nissan Certified Mechanics and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Nissan issue was fixed.

Every 2013 Nissan Murano was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is guilty nor what to do about it. That’s where we come in; Crown Nissan of Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service professional.

Is it safe to drive your 2013 Nissan Murano with the check engine light on?

This question is not incredibly uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is consistently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more precarious problem. If the check engine light is twinkling, this means that there is a precarious issue and it is recommended to service your Nissan Murano expeditiously. Call the experts at Crown Nissan of Greensboro by dialing 3368142241 so you can describe the issues. Or reduce your speed and transport your 2013 Nissan to our certified mechanics as soon as factual.

2013 Nissan Murano Check Engine Light

A flashing light indicates that the problem is draconian and if not taken care of urgently may result in leading damage to the vehicle. If the check engine light in your 2013 Nissan Murano starts flashing, that means that the problem needs hasty attention and your Nissan should be brought in urgently. This blinking light usually indicates a draconian engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can abruptly hike the temperature of the catalytic converter to a point where damage is lucid, requiring an expensive repair. A Few owners ask if spark plugs cause the check engine light to flash? This can solely be the cause. A damaging, classic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a excessively expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Crown Nissan of Greensboro rapidly by calling 3368142241.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is shining, we recommend that you pull over and contact Crown Nissan of Greensboro to help indicate if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy properly. Since each check engine code has its own level of severity, it is strict to predict how countless miles you can drive with the warning light on.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2013 Nissan Murano is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2013 Nissan Murano. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name some. With that being said, the check engine light can illustrate a variety of unmistakable things. It can be as common as your gas cap being loose or as active as engine knocking. If your check engine light is on in your 2013 Nissan Murano, contact Crown Nissan of Greensboro. Contact Crown Nissan of Greensboro today! Our Nissan service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining.

Will the check engine light reset itself?

The check engine light on your 2013 Nissan Murano will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going correct, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Nissan Murano light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to Crown Nissan of Greensboro so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more exacting failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it sufficient to get the sufficient code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is continually between $88 and $111. The sufficient news, Crown Nissan of Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to aid select the cause of your check engine light.

What could cause the check engine light to come on in a 2013 Nissan Murano?

When your check engine light comes on, this could be as understandable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rigid problem that could cause rigid damage to your engine and come with a enormous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A logical glow naturally means something less rigid but a shining check engine light indicates that your vehicle’s engine is in rigid trouble and service is crucial immediately. If your check engine light is shining in your 2013 Nissan Murano, we extraordinarily hint not to drive the vehicle and schedule Nissan service today. Below is a list of the most daily reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Nissan Murano is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to large changes, like altitude. If your Nissan Murano is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • The battery is low or dead. The battery in your 2013 Nissan Murano is every exciting. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did some decades ago, and they don't absolutely require maintenance. The price of a new one depends on the type of Nissan you drive, but check our advanced service coupons and specials.
  • New Spark Plugs or Plug Wires are essential for your 2013 Nissan Murano. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or departed, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.
  • One of the most commonplace and frequent cause is that your 2013 Nissan Murano gas cap is loose, damaged or missing. The gas cap for your 2013 Nissan Murano serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is departed or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on abruptly after you put gas in your 2013 Nissan Murano, authentic thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2013 Nissan Murano has a vacuum leak. Every Nissan Murano has a vacuum system that performs a extraordinary collection of functions. The vacuum system also helps lower down detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, excessively if they’re exposed to extraordinary heat or extreme cold.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less pragmatic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Nissan Murano's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the good mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or supplemental item can wreak havoc on your 2013 Nissan Murano if it’s not installed well. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound common, transport your Murano to Nissan and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, excessively aftermarket parts and accessories, or using OEM parts authentic place might estimate a scant bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2013 Nissan Murano’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Crown Nissan of Greensboro offers a complimentary multi-point inspection with every Nissan service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Nissan Murano will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause supplemental problems from overheating.