Please wait while the page loads...

2014 Nissan Murano Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear feasible away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Murano. There are hundreds of distinct codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling natural diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, understandable and distinguished vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Transmission issues
  • Computer output circuit issues
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Emissions controls issues
  • Bad Spark Plugs
  • Old Battery
  • Fuel and air metering systems problems

This is why it is draconian for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out suddenly by a certified Nissan technician. If the engine light comes on due to a hazardous concern, you risk damaging your automobile further by not repairing the issue noble away. Call Crown Nissan of Greensboro at 3368142241 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The middle cost for a check engine light diagnosis & testing is typically between $88 and $111. The superb news, Crown Nissan of Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help edge the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more dangerous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it superb to get the suitable code reading and diagnosis.

Will the check engine light reset itself?

The check engine light on your 2014 Nissan Murano will constantly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did several of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Nissan Murano light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Crown Nissan of Greensboro so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

Since any check engine code has its own level of severity, it is not certain to predict how plentiful miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Crown Nissan of Greensboro to help represent if your vehicle is safe to drive in or if we recommend a tow truck.

Is it safe to drive your 2014 Nissan Murano with the check engine light on?

This question is not exceedingly easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more hazardous problem. If the check engine light is flashing, this means that there is a hazardous issue and it is recommended to service your Nissan Murano expeditiously. Call the advisors at Crown Nissan of Greensboro by dialing 3368142241 so you can describe the issues. Or reduce your speed and bring your 2014 Nissan to our certified mechanics as soon as viable.

2014 Nissan Murano Check Engine Light Flashing

Although there are bountiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various established causes including something as classic as a loose gas cap. Extra established reasons for a Check Engine Light are dirty mass airflow sensor, faulty head gasket, damaged oxygen sensor, faulty emissions control part, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Nissan Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Nissan issue was fixed.

Every 2014 Nissan Murano was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its tough systems. The sensors are commonly detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what totally is remorseful nor what to do about it. That’s where we come in; Crown Nissan of Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service technological.

2014 Nissan Murano Check Engine Light

A flashing light indicates that the problem is perilous and if not taken care of suddenly may result in large wear and tear to the vehicle. If the check engine light in your 2014 Nissan Murano starts flashing, that means that the problem needs sudden attention and your Nissan should be brought in suddenly. This flashing light usually indicates a relentless engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can rapidly raise the temperature of the catalytic converter to a point where damage is achievable, requiring an pricey repair. A Little owners ask if spark plugs cause the check engine light to flash? This can exclusively be the cause. A bad, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a especially pricey repair. If your check engine light is flashing, please contact our team of automotive experts at Crown Nissan of Greensboro immediately by calling 3368142241.

Check Engine Light Service 2014 Nissan Murano

What do you do when you’re driving along in your Nissan Murano and expeditiously, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Nissan owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Nissan Murano checked as soon as probable. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2014 Nissan Murano's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t fair, a computer turns on your check engine light. This amber or yellow light is customarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic probe tool that is used by our Nissan auto repair mechanics at Crown Nissan of Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained technical to read the issue and repair it.

What could cause the check engine light to come on in a 2014 Nissan Murano?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a intense repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow often means something less serious but a flashing check engine light suggests that your vehicle’s engine is in serious trouble and service is fundamental rapidly. If your check engine light is flashing in your 2014 Nissan Murano, we excessively suggest not to drive the automobile and schedule Nissan service today. Below is a list of the most accepted reasons your check engine light can come on:

  • The battery is low or dead. The battery in your 2014 Nissan Murano is every harsh. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Nissan you drive, but check our ongoing service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or different item can wreak havoc on your 2014 Nissan Murano if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the car from starting. If these issues sound prevalent, bring your Murano to Nissan and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might estimate a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Nissan Murano’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Nissan of Greensboro offers a complimentary multi-point inspection with every Nissan service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Nissan Murano will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause different problems from overheating.
  • One of the most decent and frequent cause is that your 2014 Nissan Murano gas cap is loose, damaged or missing. The gas cap for your 2014 Nissan Murano serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2014 Nissan Murano, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Nissan Murano is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Nissan Murano is having trouble starting, idling rough or has a agile change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2014 Nissan Murano has a vacuum leak. Every Nissan Murano has a vacuum system that performs a wide mixture of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, especially if they’re exposed to massive heat or extreme freezing.
  • New Spark Plugs or Plug Wires are needed for your 2014 Nissan Murano. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classical, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Nissan Murano's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to illustrate the decent mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

What Does the Check Engine Light Mean?

One of the most continually misunderstood lights or indicators in your 2014 Nissan Murano is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few decisive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Nissan Murano. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a range of discernable things. It can be as accurate as your gas cap being loose or as threatening as engine knocking. If your check engine light is on in your 2014 Nissan Murano, contact Crown Nissan of Greensboro. Contact Crown Nissan of Greensboro today! Our Nissan service department can help you find out what code is turning your check engine light on or analyze why your check engine light is shining.